Exetools

Exetools (https://forum.exetools.com/index.php)
-   General Discussion (https://forum.exetools.com/forumdisplay.php?f=2)
-   -   Introduce Yourself (https://forum.exetools.com/showthread.php?t=14329)

metalinux 01-19-2012 00:19

I am a New Member and Say Hello
 
Hello and Warm Greetings to fellow members,

I much appeciate for offering an opportunity to register here. I wanted to thank to the member for invitation sent to me. Eventhough my background and extensive expertise is chemistry and instrumentation, I do perform much of computational calculations as part of my research interests.

I have been on different boards/forums with same handle. I should admit that I did not have any programming skills. One of my long wish is to learn reversing skills. Hopefully, I might learn some skills from the experts here.

Once again thanks for the opportunity to be here.

Metalinux

chessgod101 01-19-2012 09:46

Welcome to the forum! You have a very interesting background. With the abundance of knowledge present here, you should have no problem enhancing your knowledge of reverse engineering. ;)

dave_omirora 01-19-2012 11:05

Welcom to here! which type you have target which you want reversing?

giv 01-19-2012 14:06

Welcome here. First you must acomodate with the basic ASM syntax. Then you must read and understand all the technical info of the PE structure and import table. A good place to start is LENA151 tutorials. A god section on our forum is Windows Cracks Tutorials.

souze_villy 01-19-2012 17:28

I'm happy to come here and see many good people here to give good advices about reversing.

Deathway 01-20-2012 00:59

Welcome, you'll see that re and programing will take its place while you practice, once you have the basics, the rest depends of your mind and imagination.

stantheguy 03-26-2012 18:51

Warm Greetings to Everyone
 
Hi everyone,

I'm a new member (joined about 2 days ago, thanks to Dave_Omirora for the invitation code he extended me), and I wish above all, to one day be able to reverse-engineer any computer application, just as you do here on this forum. To this end, I'd like to solicit the help of the several experts here in guiding me through so that I can achieve this goal.
Even though my background is in telecoms(I have a second degree in telecommunications and currently, an RF engineer), reverse engineering has always fascinated me. I'd really like to be an expert in reverse engineering one day. I'd appreciate all the mentoring I can get from you guys.

BR,
stantheguy

giv 03-26-2012 20:12

Welcome here!
 
Quote:

Originally Posted by stantheguy (Post 78098)
Hi everyone,

Even though my background is in telecoms(I have a second degree in telecommunications and currently, an RF engineer), reverse engineering has always fascinated me.

The studyes does not have any impact on the RE capacity. The talent and passion does the job.
I myself have two degrees and post degress.....but the passion is always first not the education.


Quote:

Originally Posted by stantheguy (Post 78098)
I'd really like to be an expert in reverse engineering one day. I'd appreciate all the mentoring I can get from you guys.

This depends 100% on you.
It's lots of theory and even more practice.
Enjoy the stay here.
Here is the home of the most tallented (in RE and coding) persons in the world (my oppinion).
I recomend you to start with lena151 reversing for newbyes.
Keep well your account.

Li_ 04-01-2012 05:40

Welcome! Enjoy your stay. A good way to get started reversing is to first pick up some programming skills like in c or asm (asm is the obvious choice since re has lots of asm) and practice practice practice!

dre009 04-01-2012 10:13

Welcome to the forums :)
hope you'll love it here
I'm new here as well was wondering where i could post a thread like this.
nevertheless i'm getting used to here and enjoy what this forums as to offer as I am willing to learn.
Thank you all

JMI 04-01-2012 18:43

Welcome to the Forums.

Please pay attention to the big letters on the main page about Reading The Posting Guidelines. That way you won't have to hear from me about such issues. :D

Regards,

unn4m3D_BR 04-01-2012 22:20

I new member in here!
 
Hi people!

I wanted thank to member to invite me for exetools forum.
Ever I wanted participate this forum and, now i can! :D

I hope learn so much here and help always i can.

Thank you!

[]'s

Nacho_dj 04-01-2012 22:25

Nossa! Glad to see you here mate!

Without any doubt the board is becoming better in knowledge with your membership. ;)

Cheers

Nacho_dj

unn4m3D_BR 04-01-2012 22:34

I'm Glad too Nacho_dj!

Thank you for your good words. I hope ever avail the knowledge learned here my friend and ever help too.

[]'s

JMI 04-02-2012 05:27

And start off on "the right foot" by reading the Thread titled:

ALL NEW POSTERS- READ THE POSTING RULES AND PROMOTION GUIDELINES- EDIT 02-22-06

It tells you what you should do and not do as you start out. ;)

Regards,

stantheguy 04-13-2012 22:44

You are welcome friend. Well, just in case you are a newbie reverser just like me, I'd like say that you can start with Lena151 tutorials as I've been advised too.

Quote:

Originally Posted by unn4m3D_BR (Post 78178)
Hi people!

I wanted thank to member to invite me for exetools forum.
Ever I wanted participate this forum and, now i can! :D

I hope learn so much here and help always i can.

Thank you!

[]'s


partyman 04-17-2012 19:51

I'm a new member here as well. I registered without having an invitation code. ;)

yogi_saw 04-17-2012 22:13

@partyman Oh how is that possible is that some kind of bug?

JMI 04-18-2012 06:30

He's been asked to explain that event on threat of being Banned!! :eek:

Regards,

partyman 04-18-2012 14:24

Explanation sent to JMI (I think; I did not get any confirmation after submitting the pm).

I have some reversing knowledge as well, as I've read lena's tutorials and this forum as a guest. Let's hope I'm allowed to stay.

JMI 04-18-2012 16:12

I have received your PM and explaination and have responded by PM.

Thank you for your candor. It might help correct a problem.

Regards,

tigo 04-20-2012 07:13

I am new member here
 
Hi friends,

i wanted to thank who invite me here

you guys are doing good job in reversing, sharing, etc....

thanks for everything :)

stantheguy 04-22-2012 03:43

Welcome mate. As a first thing in the list of things you need to do, you will do great by reading the forum rules. This way you don't get into the bad books of the administrators.
Also, if you are newbie in re just like me, I'd advise you start off with Lena's tutorials for newbies.

genuineintel 04-24-2012 19:02

Welcome aboard.

g-max 05-07-2012 06:30

Welcome friend.
(A simple post to avoid the "180 days with no-post" rule)

Bye

willburn 05-08-2012 01:26

Im new also, and say hello!

benney 05-09-2012 16:07

welcome aboard, this forum is awesome

Ben 05-13-2012 15:39

i am a new member and say hello
 
Hi ,all:

i am a new member and want to say hello to everyone here .

i am from China ,also i am new guy at reverse work .

JCB 05-26-2012 08:22

Welcome to the forum! It is a great site to learn from. I have been visiting for many years.

Bit_Hacker 05-27-2012 07:50

Hello
 
Just wanted to say hello, I'm an old user just forgot my old login cred's...

Thanks ahmadmansoor...

-Bit_Hacker

chessgod101 05-28-2012 01:37

Introduce Yourself
 
All new members can now use this thread to introduce themselves to the community. :)

sojourner353 06-11-2012 09:31

Just want to say hello and thanks very much to JMI for allowing me to join this great Forum, cheers.

Regards,

sojourner353

sHadOw 06-14-2012 04:17

thanks for let me be part of such community im glad to be part of it now ;) i also speak spanish if you need any translation of software :)

p4r4d0x 07-05-2012 18:14

And me here too
 
Thanks for the invite im glad to be part here and contribute on sharing knowlege

UncleVan 07-06-2012 20:46

Hello...
 
...again.
Some other Linux freaks out there ?

Your UncleVan.

|roe 07-06-2012 23:33

Quote:

Originally Posted by UncleVan (Post 79548)
...again.
Some other Linux freaks out there ?

Your UncleVan.

Hey. Yes. You can check some few of the articles I wrote about debugging,exploiting and mostly development in Linux oriented mediums.

Code:

hypervion [dot] blogspot [dot] com
You can PM me here if you have anything to say or use the e-mail available on the About Me page (don't forget to specify your name and this forum and obey the rules described there).

Best regards,
roe

exfsky 07-07-2012 15:29

Quote:

Originally Posted by sojourner353 (Post 79305)
Just want to say hello and thanks very much to JMI for allowing me to join this great Forum, cheers.

Regards,

I am also:)

stantheguy 07-10-2012 20:46

You all welcome to this great forum guys. Its important, however, you all aquaint yourselves with the forum rules in order not to break them. Remember, ignorance is not an excuse.
For the newbie in RE, you may want to start with Lena151 tutorials which you can freely download from the internet.

nguoidocsach 07-16-2012 17:05

I want to say hello everyone and thanks very much to Mr. quygia for helping me join exetools.com

Thanks all :*

nhadnt 07-20-2012 12:43

Just want to say hello and thanks very much to Linhanshi for allowing me to join this great Forum, cheers.

Regards,


All times are GMT +8. The time now is 03:31.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Always Your Best Friend: Aaron, JMI, ahmadmansoor, ZeNiX