Exetools

Exetools (https://forum.exetools.com/index.php)
-   General Discussion (https://forum.exetools.com/forumdisplay.php?f=2)
-   -   fake mac address (https://forum.exetools.com/showthread.php?t=20153)

theGate 05-16-2022 23:00

fake mac address
 
Hello all

is it still possible to fake an network card mac address :cool:
A friend of mine wants to install a flexlm protected software to another computer
He has a real license

thanks
theGate

chicknsoup 05-16-2022 23:18

Have you tried TMAC?

_https://technitium.com/tmac/

theGate 05-17-2022 04:33

thanks chicknsoup

i will give it a try

I did not know that utility
But I dont know if FlemLM is enought bright to bypass this :confused:

theGate

psgama 05-17-2022 12:41

You can just change MAC address of network adapter in windows. Software will work just fine!

Driver Advanced Tab. Locally Administered Address. Set to Desired MAC address and run Software.

LaDidi 05-17-2022 13:27

A lot of software exist to change MAC address : MAC Address Changer, ...
or, as said by psgama, DIY :)

carlitos 05-18-2022 19:19

Years ago I used this method to trick flexlm and it worked but I don't remember if I had to do anything else besides changing the MAC address

alekine322 05-19-2022 05:19

MAC Address Changer
download the software and install it, it is easy to use and the instructions are simple.

uranus64 05-19-2022 05:22

In rare occasions, with the proper manufacturer software tool, you can even modify MAC address stored inside the ROM.
HERE few tools I used in the past.

UWT 05-20-2022 09:41

Not so fast... please!
 
@theGate

By studying just a little Flexlm protection, you will see that you don't just need to change the MAC address. You will need to modify, installation date and time, hard drive serial number, some registry keys, etc, etc, etc...

Flexlm is serious protection, well thought out but not impossible.

If it is well implemented it is laborious to open it.

Try to make your own keygen, there is a lot of information about Flexlm, it's a good school.

Regards,
UWT

silver 05-30-2022 01:08

I recommend you change the mac address in ROM, if for keygen purpose.....or write a keygen. OS level mac address chaging sometimes does not came into effect.

cp74 06-02-2022 13:37

Even for Windows 11, still possible to change the MAC via Device Manager in OS level.

wild 06-05-2022 15:27

You can use VirtNet:
https://www.ntkernel.com/virtnet/

psgama 06-07-2022 06:28

Quote:

Originally Posted by wild (Post 125375)
You can use VirtNet:
https://www.ntkernel.com/virtnet/

I've used this before. It work well.

arthur plank 06-27-2022 15:21

I've not had to set the MAC address for a while now, but in the 'old days' the MAC address was stored in EEPROM (flash memory) and was quite easy to write once the datasheet for the network chip was examined. It's likely that the principle's unchanged.

theGate 08-11-2022 08:24

Hello all

I got the license and they use SERVER hostname Composite=xxxxxxxxx 28100

I never see Composite in the past
Is it a kind of combination of mac adress, HD serial number, host name ...

Any info are welcome

thanks

theGate


All times are GMT +8. The time now is 07:12.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Always Your Best Friend: Aaron, JMI, ahmadmansoor, ZeNiX