Activelock v3.7 bypass issue

[PriSim]

Hello,

I am trying to bypass active lock which is used to protect a cnc laser engraver software.

Any idea , i tried old methods but they are not working with new version.


Demo link:

http://www.robot-eyes.com/RobotLaser/Full/RobotLaser_1.0.3.zip

[NoneForce]

Hi,

If the trial limitation is only 15d, just kill and reset the trial period with this pass: Pioneer.1
Tip : In the registration window click on the left image on the top and type the password

[PriSim]

Originally Posted by NoneForce

Hi,

If the trial limitation is only 15d, just kill and reset the trial period with this pass: Pioneer.1
Tip : In the registration window click on the left image on the top and type the password

I tried this before , but unfortunately with days limitation dev. disabled alot of necessary function.
e.g
saving the Generated Gcode, viewing the Gcode etc.

[NoneForce]

Originally Posted by PriSim

I tried this before , but unfortunately with days limitation dev. disabled alot of necessary function.
e.g
saving the Generated Gcode, viewing the Gcode etc.

try this :

https://mega.nz/#!P5EwzQjb!htZpdRjor3-H0yJ3MXZsoQIqBcWlPP4tbr0Sij7VPp0

[PriSim]

Originally Posted by NoneForce

try this :

https://mega.nz/#!P5EwzQjb!htZpdRjor3-H0yJ3MXZsoQIqBcWlPP4tbr0Sij7VPp0

Worked fine , options are active now.

Can you please share any documentation or tutorial about this whole patching procedure ?

[h4sh3m]

Hi

Send me your "Installation Code", I'll give you license key


BR,
h4sh3m

[Rasmus]

I can also send you a working license key.. Just send the Installation Code

[PriSim]

Originally Posted by Rasmus

I can also send you a working license key.. Just send the Installation Code

If possible share , the tool , that can generate the key!

So whole of my class can take advantage of it.

[bolo2002]

Originally Posted by PriSim

If possible share , the tool , that can generate the key!

So whole of my class can take advantage of it.

if it's for a whole class,30 bucks is not that expensive..

[PriSim]

Originally Posted by bolo2002

if it's for a whole class,30 bucks is not that expensive..

Its a lab tool not a tool for regular use if no one want to share that tool its ok , any how "NoneForce" gives a very great solution.

[Rasmus]

Originally Posted by PriSim

If possible share , the tool , that can generate the key!

So whole of my class can take advantage of it.

The method to crack it is described in tuts4you forum. Just do a search there. It's very easy and even source code is provided

[PriSim]

Originally Posted by Rasmus

The method to crack it is described in tuts4you forum. Just do a search there. It's very easy and even source code is provided

Before started thread over here , i do search every where , but found nothing satisfactory, at tuts4you, in search i found nothing just two topics , one is about request and one is about protection ID.

PS:
I am an ordinary member there , if that tutorial is in special section i can't access it.