safekey hardlock emulator infos

[peterg70]

In respect to the Sentinel Dongle Emulator to convert a proper dump modify the sample.ssp as follows. No algos/querys worked out but it should get the dongle working with the standard 3f cells.

The red cells are the protection bits for the 3f cells (if you want to unlock cells change 01 to 03 to allow changes via the dongle editing tools.
The blue cells contain the word for each cell

I replaced the two section with a hexeditor to contain the dumped dongle contents.

Then open DOS prompt and enter the following command
Net STOP Sentinel

Rename the sentinel.sys located in c:\windows\system32\drivers\ to something else
then copy the SSP file and the Sentinel.sys from the zip file located above.
Then type Net Start Sentinel.

You can now edit the contents of the dongle memory to suit.
Refer to other post containing the Sentinel Dongle tools.

These changes are not saved when you shutdown the machine therefore update the SSP file as required.
If testing changes to SSP repeat the Net Stop/Net Start to reset as required.

00000000 54 4B 47 46 24 24 03 01 01 01 03 03 03 03 03 03
00000010 00 00 01 01 02 01 01 01 00 00 00 00 00 01 00 00
00000020 00 01 00 00 00 00 00 00 02 03 01 02 03 03 03 03
00000030 02 03 01 02 03 03 03 03 02 03 01 02 03 03 03 03
00000040 02 00 01 00 00 00 03 03 CC 02 27 CE 00 00 00 00
00000050 23 F7 00 00 EA 69 00 00 00 00 00 00 00 0C 21 34
00000060 80 25 0A 00 0A 00 0A 00 00 00 01 00 00 00 00 00
00000070 00 00 00 00 00 00 00 00 00 00 75 0F 00 00 00 00
00000080 00 00 00 00 00 00 00 00 11 26 61 C0 21 06 01 00
00000090 B2 18 21 F4 00 00 00 00 7F 25 61 C0 21 06 01 00
000000A0 92 75 56 FC 00 00 00 00 90 25 61 C0 21 06 01 00
000000B0 09 32 06 F7 00 00 00 00 80 25 00 00 21 06 00 00
000000C0 00 00 00 00 10 1B 61 C0 38 00 00 00 00 00 00 00
000000D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Peterg70