#16
|
|||
|
|||
nice info. not need more..
but need how to dump well ..with some tool..the WP not found thanks all Last edited by learner38; 10-11-2005 at 00:40. Reason: update news |
#17
|
||||
|
||||
@minawahib1
According to the fastread.exe you need one extra file And if you boot from a win9x disk and run the fastread from here,you should be able to get the safekey hardlock emul up and running...... (well, if you may believe the readme file) |
#18
|
|||
|
|||
@DCA
i don't understand you.. after dumping the dongle by safekey dumper(fastread or fastreadusb) we have the the dump files ( like a Modad or Log file) so..we need the tool which convet that to a real emulator.... or convert this log and dat file to *.FST file and work with the emulator Note ( the safekey emulatoer not working with HARDLOCK EYE- tested by me if you have hardlock EYE you should use one of them 1-s0pter dump 2- the HL MOnitor By brain studio ..i have it .If any one need it 3- the hardlock filter ...can only know the MOdad (pass or addrwess) but can't log all intercpet TIP for sentinel.. if u unplug the dongle ..when the dumper working..ur dongle will be damage thanks alot all we need more info about dongles |
#19
|
|||
|
|||
In respect to the Sentinel Dongle Emulator to convert a proper dump modify the sample.ssp as follows. No algos/querys worked out but it should get the dongle working with the standard 3f cells.
The red cells are the protection bits for the 3f cells (if you want to unlock cells change 01 to 03 to allow changes via the dongle editing tools. The blue cells contain the word for each cell I replaced the two section with a hexeditor to contain the dumped dongle contents. Then open DOS prompt and enter the following command Net STOP Sentinel Rename the sentinel.sys located in c:\windows\system32\drivers\ to something else then copy the SSP file and the Sentinel.sys from the zip file located above. Then type Net Start Sentinel. You can now edit the contents of the dongle memory to suit. Refer to other post containing the Sentinel Dongle tools. These changes are not saved when you shutdown the machine therefore update the SSP file as required. If testing changes to SSP repeat the Net Stop/Net Start to reset as required. 00000000 54 4B 47 46 24 24 03 01 01 01 03 03 03 03 03 03 00000010 00 00 01 01 02 01 01 01 00 00 00 00 00 01 00 00 00000020 00 01 00 00 00 00 00 00 02 03 01 02 03 03 03 03 00000030 02 03 01 02 03 03 03 03 02 03 01 02 03 03 03 03 00000040 02 00 01 00 00 00 03 03 CC 02 27 CE 00 00 00 00 00000050 23 F7 00 00 EA 69 00 00 00 00 00 00 00 0C 21 34 00000060 80 25 0A 00 0A 00 0A 00 00 00 01 00 00 00 00 00 00000070 00 00 00 00 00 00 00 00 00 00 75 0F 00 00 00 00 00000080 00 00 00 00 00 00 00 00 11 26 61 C0 21 06 01 00 00000090 B2 18 21 F4 00 00 00 00 7F 25 61 C0 21 06 01 00 000000A0 92 75 56 FC 00 00 00 00 90 25 61 C0 21 06 01 00 000000B0 09 32 06 F7 00 00 00 00 80 25 00 00 21 06 00 00 000000C0 00 00 00 00 10 1B 61 C0 38 00 00 00 00 00 00 00 000000D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Peterg70 |
#20
|
|||
|
|||
Hi allI have question about it..
I dumped hardlock eye (alladin) by hl-dump and I have reg and dat files but I don't know how can I emulate...I don't have good program for this files.I tryed emulating by Toro's Hardlock Mon- program see Hardlock Eye but don't start - orginal licence decode error.(this licences and orginal dongle working!) |
#21
|
|||
|
|||
That means emulator has not been loaded correctly or data to be emulated is not correct.
|
#22
|
|||
|
|||
These changes are not saved when you shutdown the machine therefore update the SSP file as required.
If testing changes to SSP repeat the Net Stop/Net Start to reset as required. CC 02 27 CE 00 00 00 00 23 F7 00 00 EA 69 00 00 Very strange, why at SSP stored all critical values, such as C6 and WP. |
#23
|
|||
|
|||
These items are still required to perform the correct functions.
If program attempts to write to a field with fake passwords and you return "All ok" to each password then the program can determine that you have modified the dongle or added an emulator. It is always needed to create the Writepassword etc and needs to check it to make sure its correct. |
#24
|
|||
|
|||
Quote:
everybody can tell me the algorithm. |
#25
|
|||
|
|||
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
*.syd file for safekey emulator | BOPOH | General Discussion | 11 | 01-24-2007 20:52 |
Bug of safekey Hardlock 24K emulator | orchid88 | General Discussion | 0 | 01-06-2007 18:26 |
Safekey release their new HASPHL emulator? | Elickson | General Discussion | 1 | 06-04-2006 00:34 |