Exetools  

Go Back   Exetools > General > General Discussion

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 08-22-2005, 08:59
hanzi
 
Posts: n/a
Flexlm 7.2 LIC file use on Flexlm 9.2 display error -73 ?

Flexlm 7.2 LIC file use on Flexlm 9.2 display error -73 ?

1.I made a LIC file for a software protect by Flexlm 7.2, it OK
2.but when it use on a new version software protect by Flexlm 9.2, it display
Flexlm error -73,125: Local checkout filter rejected request.
3.carefulness read the FLEXlm latest information "Flex2004.htm" by CrackZ , i set the 2 bad flag with 0 and 1. but it still display the same error -73,125:
4.is there anyone know what is the problem and how to deal with it?

Regards,
hanzi

Last edited by hanzi; 08-24-2005 at 17:41.
Reply With Quote
  #2  
Old 08-22-2005, 14:21
nujia
 
Posts: n/a
you can make a license using flexlm sdk 9.2,
and you can visit this blog,
http://blog.csdn.net/zxg32/
Reply With Quote
  #3  
Old 08-22-2005, 16:02
hanzi
 
Posts: n/a
I got vendor key 1-5 and encseed 1-2, I made a LIC file for a software protect by Flexlm 7.2, it OK. So I am sure these info are correct.I feed all of these to lmcode.h of 9.2 SDK and build it, then a error occured after lmnewgen.exe was generated:

Upgrading from v7.2, using SIGN=, non-CRO
lc_init failed: Invalid FLEXlm key data supplied
FLEXlm error: -44,49
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
NMAKE : fatal error U1077: 'lmnewgen.exe' : return code '0x1'
Stop.

is there anyone know what is the problem and how to deal with it?

Regards,
hanzi
Reply With Quote
  #4  
Old 08-22-2005, 23:47
tom324 tom324 is offline
Friend
 
Join Date: Jan 2002
Posts: 215
Rept. Given: 5
Rept. Rcvd 6 Times in 5 Posts
Thanks Given: 13
Thanks Rcvd at 12 Times in 8 Posts
tom324 Reputation: 6
For 9.2 you have to find new vendor keys 1-5 and new seeds.

Tom
Reply With Quote
  #5  
Old 08-24-2005, 17:39
hanzi
 
Posts: n/a
Thanks Tom,
i make lmrecode to generated vendor keys and new seeds, but when i use 9.2 SDK to build lmcrypt.exe,it still

FLEXlm error: -44,49

IS the glseeds & seedval has changed for 9.2?
Reply With Quote
  #6  
Old 08-24-2005, 18:52
szy111
 
Posts: n/a
give me the license, let me try.
Reply With Quote
  #7  
Old 08-25-2005, 15:58
hanzi
 
Posts: n/a
thanks
set break in _xorname i get the job & structure, use lmrecode to generated vendor keys and new seeds, build lmcrypt.exe use 9.2 SDK and made a LIC file . but when i use LIC file it still display
Flexlm error -73,125: Local checkout filter rejected request.
even i set the 2 bad flag with 0 and 1--introduse by the FLEXlm latest information "Flex2004.htm" by CrackZ , . but it still display the same error -73,125.
i think this software maybe has another checkout adress for LIc type,
is there anyone met the same problem and how to deal with it?

Last edited by hanzi; 08-31-2005 at 13:13.
Reply With Quote
  #8  
Old 08-29-2005, 17:06
hanzi
 
Posts: n/a
set break in _xorname i get the job & structure, use lmrecode to generated vendor keys and new seeds, build lmcrypt.exe use 9.2 SDK and made a LIC file . but when i use LIC file it still display
Flexlm error -73,125: Local checkout filter rejected request.
read the Nolan Blender's tutorial about "how crypt filters work "from CracZ site , i think the app is used "checkout filters " . But for my poor english and this is first time i meet the checkout filters Flexlm app, i still have some dimness about it,is there anyone give me a favor:
1. Nolan Blender says to build lmcrypt.exe ,we need build lmkeyfil.c file first .Do i must get some special SEEDS for build lmkeyfil.c like the tutorial ? and how to get it:

2.set a breakpoint in call lc_set_attr there is a passage like this :
67F5043D A1 98F0FD67 MOV EAX,DWORD PTR DS:[67FDF098]
67F50442 68 08DDFD67 PUSH 67FDDD08
67F50447 6A 38 PUSH 38
67F50449 50 PUSH EAX
67F5044A FF15 A037FD67 CALL DWORD PTR DS:[67FD37A0] ;lc_set_attr

So I think :
the job structure is probably in EAX when it gets pushed [67FDF098].
38 is indeed LM_A_CHECKOUTFILTER
67FDDD08 is certainly a good place to look for the checkout filter. BUt there is not a function , just:

67FDDD08 505C3A43
67FDDD0C 72676F72
67FDDD10 46206D61
67FDDD14 73656C69
67FDDD18 7261455C
67FDDD1C 65446874
67FDDD20 69736963
67FDDD24 6C2F6E6F
67FDDD28 6E656369
67FDDD2C 2F736573
67FDDD30 61636F67
67FDDD34 696C2E64
67FDDD38 00000063
67FDDD3C 00000000
What use does this value have?

3. What use does xorvals[] & permute_t tab1[] have? and how to build it
4. is there anyting i must to do ?
hanzi

Last edited by hanzi; 08-31-2005 at 13:16.
Reply With Quote
  #9  
Old 09-05-2005, 10:57
hanzi
 
Posts: n/a
Patch the Flexlm error -73,125: Local checkout filter rejected request.

1.Looking in lm_attr.h we find this:
#define LM_A_CHECKOUTFILTER 45 /* Vendor-defined checkout filter */
/* PTR to func returning int */
So this means that a 45 (0x2d hex) will be pushed right before a call to lc_set_attr to define a vendor defined checkout filter. Disassembling our target we find the following:
.text:67F504C9 loc_67F504C9: ; CODE XREF: sub_67F50370+155j
.text:67F504C9 mov edx, dword_67FDF098
.text:67F504CF push offset loc_67F50D80
.text:67F504D4 push 2Dh
.text:67F504D6 push edx
.text:67F504D7 call off_67FD37A0 ; Indirect Call Near Procedure _lc_set_attr

.data:67FD37A0 off_67FD37A0 dd offset _lc_set_attr ; DATA XREF: sub_67F50370+DAr

2. Ok, this looks like the one we want£º
- the job structure is probably in EDX when it gets pushed [67FDF098].
2D is indeed LM_A_CHECKOUTFILTER
67F50D80 is certainly a good place to look for the checkout filter.
For those targets that use an extremely complex routine that can't be easily figured out you can simply patch the function to always return 0.
Reply With Quote
  #10  
Old 07-05-2006, 18:51
sparkscrack
 
Posts: n/a
Error -73, 125

Hi all,

i had the same problem the last days. The solution for my problem was that
the new version of the program doesnt accept HOSTID=ANY anymore. It must be replaced by normal locked hostid and it works fine.

Greets
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FLEXlm v10.8.0 Build error rcer General Discussion 3 06-18-2009 03:22


All times are GMT +8. The time now is 17:29.


Always Your Best Friend: Aaron, JMI, ahmadmansoor, ZeNiX
( 1998 - 2020 )