how 2 update a hasp????

#1 05-04-2005, 02:12

hey pals....

needed some help.....

i got a software, that uses a hasp.

i dumped the hasp successfully,,,,

but just needed 2 know, how 2 update a hasp. i mean edit inside the hasp.

if i have a hasp dump, and i want 2 update that dump, 2 another hasp....

is there any way 2 do so???

thanx

TDW {RES}

#2 05-04-2005, 06:06

I think there is a small confusion here. There are 2 things inside the hasp. Simplemindedly, the factory programmed things (encoding algorithms/commands etc) and the custom data (those that developer programmed inside the embedded memory).

What you have dumped? The factory programmed stuff or the memory data? If you have dumped the factory programmed stuff as far as i know you cant rewrite them in another hasp and have an exact copy of the original hasp. That dump information can only be used to create an emulator, a software that will stay in the memory and behave like the original hasp, like reply to commands, encode/decode data etc.

On the other hand, if you need to write the memory data, you need the access codes that supplied from the hasp manufacturer to the developer (2 or 4 passwords).

Anyway, duplicating hasp is not an easy story and there are only some crackers that are able to easily create hasp copies (using an emulator of course).

#3 05-04-2005, 23:11

Hello The Day Walker

Quote:

but just needed 2 know, how 2 update a hasp. i mean edit inside the hasp.

To edit inside hasp memory use haspedit u need to know pass of that hasp4

Quote:

if i have a hasp dump, and i want 2 update that dump, 2 another hasp

Let me ask you a question why do u need to do that ?

Regards, Sope.

#4 05-05-2005, 03:08

@ sope2001

pal....

i have purchased a soft for rs, 10000, it came with a hasp.

i dumped the hasp using hasp emulator pro. and also got the password of the

hasp.

now i want 2 create a duplicate of the hasp. 2 run it on another pc.

if i can make a duplicate hasp, then i dont need any emulator or anything

so needed 2 know...

wot all is required 2 duplicate a present working hasp...

and where 2 get it..

thanx

TDW {RES}

#5 05-05-2005, 03:41

You *CANT* duplicate a hasp in hardware mode. Besides the memory that is inside the hasp (that can be easily written using the haspedit.exe and the 2 passwords) there is a chip that provides the encrypt/decrypt services, and this one uses a unique per hasp algorithm. Nothing can write to the hasp chip (EPROM) except for an EPROM programmer. But this is a hardware, not a software you can download. At last, I know only one man that can make hardware hasp duplicates. He's Martin Mckeen.

If that software worths that much, you can spend some money (about $100) providing the dumped data to a dongle cracking service and have a custom hasp software emulator for you.

s0cpy · #6 05-05-2005, 14:35

Look at this......
The HASP4 M4/M1 programmer :
hxxp://_www.gsmunlock.com/equipment/HaspEdit102.gif

Features :

- HASP4 M4/M1 PSW1/2 programming
- HASP ID programming
- Encryption Key programming
- Save/Load Profile
- Logging of programmed HASP4

#7 05-06-2005, 02:58

s0cpy, very nice screenshot but I cant see any overview of this product. Do we know if requires a hardware for the writting? Why the gsmunlock.com doesnt include this software in the main equipment page?

#8 05-06-2005, 04:08

i can purchase,,, new hasps from company that sells new hasps,,then i can

update the dump by using hasp edit...

can i do this????

thanx

TDW {RES}

#9 05-07-2005, 14:48

the hasp password and ID is easily got . and the memory data in hasp dongle is easily got by the password and haspedit.exe too. after update the password(in the memory data file --*.hed), we may write the data to a new hasp dongle. but cuz software is bound with the old hasp password, it can't be run with new hasp dongle. so, we must update the hasp password to be new in the software. it seems to be difficult

#10 05-10-2005, 00:00

Quote:

Originally Posted by s0cpy

Look at this......
The HASP4 M4/M1 programmer :
hxxp://_www.gsmunlock.com/equipment/HaspEdit102.gif

Features :

- HASP4 M4/M1 PSW1/2 programming
- HASP ID programming
- Encryption Key programming
- Save/Load Profile
- Logging of programmed HASP4

Where can we get this tool?

Cheers, neogen

JMI · #11 05-10-2005, 00:52

Did it, by any chance, occur to you that YOU could actually try SEARCHING for a Hasp Editor?

For example using various combinations of "HASP4 M4/M1 programmer;" such as HASP4 M4/M1" and/or "HASP4 programmer" (without the quotes, of course). Have you tried something desparate, like maybe looking at all the things you can download from the aladdin site itself??? Well Duh!

They not only have a whole lot of tools for working with Hasps, which is not surprising since they make them, they offer FREE a whole lot of useful things, including a tool called, gasp, HaspEdit. Now it may or may not be the one shown in the picture, by Grafas, but it might be useful.

I say AGAIN, searching is one of THE MOST IMPORTANT SKILLS a wannabe reverser can attempt to master. Even if you can't find this specific tool, you CAN find tools to edit Hasps, and from the makers themselves.

Regards,

#12 05-10-2005, 01:29

http://bilosan.free.fr/Nouveau%20dossier/haspedit/

JMI · #13 05-10-2005, 02:14

Why not let him do his own searching. That link is easily locatable with the search criteria I already gave him.

Try not to encourage basic lack of effort.

Regards,

#14 05-10-2005, 06:02

The utility to Edit the hasp (HaspEdit.exe) is freely distributed by Aladdin. That utility allows ONLY to change the memory content of the hasp. Not the password. Not the hardcoded security functions and algorithms. So you are unable to duplicate a hasp with that utility. s0cpy mentioned a utility that is able to program the hasp (like the factory) but as I can see when we asked him for more information he kept a great silence.

#15 05-15-2005, 20:46

@kingday

it means everytime a new hasp is provided by a software company, it has 2 modify the soft with the new hasp password......

is that the case????